README.TXT is provided in addition to:
   README.CID
   README.INS
on this altered diskette of OS/2 Warp 3.0 for CD.
OS/2 Warp 3.0 for CD will require a modified 
Installation Diskette and a modified Diskette 1.


The Installation and Diskette 1 provided with OS/2
Warp 3.0 cannot read the partition table of your Thinkpad 
Hard Disk Drive. This impacts:

  Opt PN      Description
  00K7902     Thinkpad 765/760 5.1GB IDE Hard Disk Drive
  02K0506     Thinkpad 380/386 5.1GB IDE Hard Disk Drive
  11J8947     Thinkpad 770 5.1GB IDE Hard Disk Drive


Problem:
When attempting to partition the Thinkpad 5.1GB Hard Disk Drive,
the partition information will be displayed incorrectly. For
example, the partition information displayed may indicate that
a 35MB DOS partition has been created, or another larger and
unformatted/non-DOS partition is available as freespace. You
are not able to delete and partition the drive to its capacity.


Solution for OS/2 Warp 3.0 on CD:
1) Ensure that your Thinkpad 380/385 or 765/760 system has
   the most recent BIOS. The system BIOS does not directly
   affect the drive's partition table, but will ensure that
   your system is able to utilize the new technology of the
   drive.

   
   a) Important Notice for Thinkpad 765/760 systems:

      Updates to System BIOS will be made available through the
      IBM PC Company File Repository at (919) 517-0001. To access
      the files from the Web: use http://www.pc.ibm.com. A direct
      link to the files is available by using 
      http://www.us.pc.ibm.com/files.html.

      Prior to installing your 5.1GB HDD option, you must install
      the System Program Service (BIOS) Diskette included with the
      5.1GB HDD. The required BIOS version must be dated 8/15/97 or later. 
      More recent versions will be added to the IBM PC Company File
      Repository as they are made available.

      Check the level of the System BIOS currently used by your
      Thinkpad 760 or 765:
      1. Turn off the computer, and remove any diskette from 
         the diskette drive.
      2. Press and hold F1, then turn on the computer. Hold F1 
         until the Easy-Setup menu appears. The BIOS
         is shown on the Easy Setup main screen.

      If the BIOS date is August 15, 1997 (8/15/97) or later, 
      you DO NOT need to install the update to your BIOS.

      To install the System Program BIOS:
      * You need an AC Adapter and a charged battery pack.
      * If your computer is attached to a docking station or
        port replicator, turn off the computer and detach it
        before before updating the system BIOS.
      * From the enclosed diskettes with your 5.1GB HDD, select the one  
        matching your Thinkpad model. The BIOS will not install from
        the wrong diskette. You will get an error message.

       1. Firmly connect the AC Adapter to the computer.
       2. Insert the System Program Service Diskette into the 
          diskette drive and turn on the computer.
       3. On the menu which appears, choose the first option, "Read this  
          first." After you read the instructions,
          go back and choose the second option, "Update system program."

       Attention:  Do not turn off or suspend the computer until the update 
       has been completed.  IF YOU TURN OFF OR SUSPEND THE COMPUTER WHILE THE 
       UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MIGHT HAVE TO BE 
       REPLACED.


  b) Important Notice for Thinkpad 380/385 systems:

      Updates to System BIOS will be made available through the
      IBM PC Company File Repository at (919) 517-0001. To access
      the files from the Web: use http://www.pc.ibm.com. A direct
      link to the files is available by using 
      http://www.us.pc.ibm.com/files.html.

      Prior to installing your 5.1GB HDD option, you must install
      the System Program Service (BIOS) Diskette included with the
      5.1GB HDD. The required BIOS version must be dated 8/15/97 or later. 
      More recent versions will be added to the IBM PC Company File
      Repository as they are made available.

      Check the level of the System BIOS currently used by your
      Thinkpad 380 or 385:
      1. Turn off the computer, and remove any diskette from 
         the diskette drive.
      2. Press and hold F1, then turn on the computer. Hold F1 
         until the Easy-Setup menu appears. The BIOS
         is shown on the Easy Setup main screen.

      If the BIOS date is August 15, 1997 (8/15/97) or later, 
      you DO NOT need to install the update to your BIOS.
 
      To install the System Program BIOS:
      * You need an AC Adapter and a charged battery pack.
      * If your computer is attached to a docking station or
        port replicator, turn off the computer and detach it
        before before updating the system BIOS.
      
       1. Firmly connect the AC Adapter to the computer.
       2. Insert the System Program Service Diskette into the 
          diskette drive and turn on the computer.
       3. On the menu which appears, choose the first option, "Read this  
          first." After you read the instructions,
          go back and choose the second option, "Update system program."

       Attention:  Do not turn off or suspend the computer until the update 
       has been completed.  IF YOU TURN OFF OR SUSPEND THE COMPUTER WHILE THE 
       UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MIGHT HAVE TO BE 
       REPLACED.
 

2) Use the Warp 3.0 Installation Diskette and Diskette 1 from the IBM
   File Repository to partition and to install OS/2 Warp 3.0 from CD
   to your 5.1GB Thinkpad HDD option.  
3) After OS/2 files are copied from the Warp 3.0 CD, press F3 to quit to   
   an OS/2 prompt.			
4) You must replace IBM1S506.ADD in two locations using IBM1S506.ADD
   from Diskette 1. You will need to modify the attributes of IBM1S506.ADD
   using one of the following methods from an OS/2 prompt:

   a)  COPY F:\OS2IMAGE\DEBUG\ATTRIB.EXE C:\OS2\BOOT
       COPY F:\0S2IMAGE\DEBUG\ATTRIB.EXE C:\OS2\INSTALL\BOOTDISK
                               OR
   b)  PATH=F:\OS2IMAGE\DEBUG\
   where F: is the drive letter of your CD Rom Drive.
  
5) Insert Diskette 1 into the floppy diskette drive. You will
   need to change the attributes of IBM1S506.ADD in two directories,
   copy IBM1S506.ADD from Diskette 1 to C:\OS2\BOOT and 
   C:\OS2\INSTALL\BOOTDISK, and then restore the attributes to
   IBM1S506.ADD. From an OS/2 prompt, complete the following:
   
     1)  CD C:\OS2\BOOT
     2)  ATTRIB -A -R -H IBMS506.ADD
     3)  COPY A:IBM1S506.ADD C:\OS2\BOOT
     4)  ATTRIB +A +R +H IBMS506.ADD
     5)  CD C:\OS2\INSTALL\BOOTDISK
     6)  ATTRIB -A -R -H IBMS506.ADD
     7)  COPY A:IBM1S506.ADD C:\OS2\INSTALL\BOOTDISK
     8)  ATTRIB +A +R +H IBMS506.ADD

6) Remove the diskette from the floppy diskette drive. Reboot the
   system and follow the on-screen instructions to complete the
   installation of OS/2 Warp 3.0 from CD.