EC-209  (550-0555B)         Setting The Time          Faxback Doc. # 6330

Follow these steps to set the time.

1.  Press TIME to enter the clock mode.

2.  Set VOLUME to the mid position or to MAX.

3.  Press SET/M- to enter the time setting mode.  A beep sounds and SET
    appears on the display for about 12 seconds.

NOTE: If you set VOLUME to OFF, the beep does not sound.

4.  Within 12 seconds, press HOUR/MR to set the hour and MIN/MC to set
    the minutes.

NOTES:  The seconds reset to zero each time you press MIC/MC.

        The clock uses the 12-hour format.  PM appears for times after
        noon.

SETTING THE ALARM

Follow these steps to set the alarm time.

1.  Press TIME to enter the clock mode.

2.  Set VOLUME to the mid position or to MAX.

3.  Press ALM, ALARM ON/OFF/M+ to activate the alarm.  A beep sounds,
    ALM and (L ( ((o)) ) appears on the display for about 12 seconds.

NOTE:  If you set VOLUME to OFF, the beep or the alarm does not sound.

4.  Press SET/M- to enter the alarm setting mode.  A beep sounds and SET
    appears on the display for about 12 seconds.

5.  Within 12 seconds, press HOUR/MR to set the hour and MIN/MC to set
    the minutes.

NOTE:  To check the alarm time, press ALM.  The display shows the alarm
       time for about 12 seconds.

At the alarm time, a beep sounds for about 60 seconds and then
automatically turns off.

NOTE:  Press any key to turn off the alarm before it automatically
       turns off.

(CJD/all-06/23/94)