CPC101992
358.DOC
                      Complete FAX/Gateway
           Requirements for Using CFAX/G on a Network


This document is provided as "For your information" and as is.
Neither The Complete PC nor any of it's employees assume any
responsibility for consequences resulting from the use of the
following information nor can the Complete PC technical support
provide help with this document.  The user of said information
does so at his or her own risk.

Before you install CFAX/G for use on your local area network, you
must have the following:

An IBM or 100% compatable PC running DOS version 3.1 or higher,
to be used as a network workstation.

A Novell local area network (version 2. 1 or higher) installed
and running properly.

A MHS installed and running properly.  MHS must be running on
either the dedicated MHS server, or on the CFAX/G server, but can
only be installed on one computer on the network.

A MHS compatible E-mail application, installed and running
properly.

An IBM PC or 100% compatible with at least 640K of memory as the
dedicated fax server, with a CFAX/Gateway fax board installed.
The CFAX/G software must be installed on this server.

              Dedicated CFAX/G Server Requirements

The requirements for the computer used as the dedicated CFAX/G
server are listed below. Your local area network may already be
up and running with some or all of the hardware listed.

IBM PC/XT/AT- or 100% compatible
DOS 3.1 or higher
Minimum 10 Mbyte hard disk
Minimum 640K of RAM
CGA, EGA, VGA, or Hercules compatable video card
Novell network interface card installed
CFAX/Gateway fax card installed