CPC092292

                  The Complete FAX and FAX 9624
                  Using the @1 and @2 Functions
                                
                                

This document is provided as "For your information" and as is.
Neither The Complete PC nor any of it's employees assume any
responsibility for consequences resulting from the use of the
following information nor can the Complete PC technical support
provide help with this document.  The user of said information
does so at his or her own risk.

The @ functions are used to substitute routinely used telephone
company access codes into the dialing routine for your faxes.
You have two of them, @1 and @2.  Use them in the phone number
field from your Send Faxes screen.  For example:

                         @1408-434-9600
                                
Where the @1 equals the following:
                                
                          0,3458729;;;;
                                
Where the 0 is the operator attention code followed by a comma to
give a brief pause, the the access code, the four long pauses to
wait for the bell tone from the phone company.  You will want to
setup your @1 and @2 function to the lengths and codes required
for your particular situation.

The following would be what the CFAX software would dial:

                    0,3458729;;;;408-434-9600
                                
You could also use an @ funtion for a password.  For example:

                        @1408-434-9600@2
                                
Where @2 would equal ;;33 the resulting dial string would be:

                 0,3458729;;;;1408-434-9600;;33
                                
Access to the credit card codes is located in F7 Special
Features, F7 Fax Configuration from the Complete FAX.  It is at
the bottom of the form.