/******************************************************************/
/*                                                                */
/*                                                                */
/*  This installation program performs a quick installation of    */
/*  the device driver and the MICROSOFT CD extension program      */
/*  into the system. The 'CONFIG.SYS' and 'AUTOEXEC.BAT' files    */
/*  will be modified when an install option is invoked.           */
/*                                                                */
/*  <Express Install>/<Custom Install>                            */
/*                                                                */
/*  Express Install                                               */
/*  ===============                                               */
/*  This option provides the user automatic configuration of      */
/*  the CD-ROM Drive. It will automatically detect the drive      */
/*  during bootup.                                                */
/*                                                                */
/*  Custom Install                                                */
/*  ==============                                                */
/*  This option provides the user the flexibility in configuring  */
/*  the CD-ROM Drive during boot-up.                              */
/*  The user can select the following options:                    */
/*  - Drive Letter                                                */
/*  - Device Name                                                 */
/*  - Base I/O Address                                            */
/*  - IRQ                                                         */
/*  - Verbose Option                                              */
/*                                                                */
/*  <Drive Letter>                                                */
/*  This allows user to define the drive letter to be installed   */
/*  on the CD-ROM drive.                                          */
/*                                                                */
/*  <Device Name>                                                 */
/*  A string of up to a maximum of 8 characters is allowed in     */
/*  this option.                                                  */
/*                                                                */
/*  <Base I/O Addr>                                               */
/*  The base I/O address option allows user to enter              */
/*  any of the following addresses.                               */
/*                                                                */
/*  There are currently only 2 available port addresses. They are */
/*  a) 1F0  - Master IDE Port (default)                           */
/*  b) 170  - Secondary IDE Port                                  */
/*  (All addresses are in hexadecimal form.)                      */
/*                                                                */
/*  <IRQ>                                                         */
/*  This option allows you to select the specific IRQ line which  */
/*  you want to use. Please check your motherboard                */
/*  to ensure that your computer can support the specified        */
/*  IRQ line. By default, the IRQ line used is 14.                */
/*  The maximum number you can specify is 15.                     */
/*                                                                */
/*  <Verbose>                                                     */
/*  This option if turned on will display the drive installation  */
/*  configuration at boot-up time.                                */
/*                                                                */
/*  The configuration can also be performed or modified by        */
/*  editing the 'CONFIG.SYS' and 'AUTOEXEC.BAT' files.            */
/*                                                                */
/*  The following line can be added or modified (if already       */
/*  installed) in the 'CONFIG.SYS' file:                          */
/*                                                                */
/*  DEVICE=C:\<path>\OSIxxxx.SYS /D:xxxxxx /P:xxx,xx,x /V         */
/*                                                                */
/*  /D:MSC001 will define the device name for the CD-ROM          */
/*  installed on the system. This name has to be identical to     */
/*  that defined in the line installing the MSCDEX.EXE program in */
/*  the 'AUTOEXEC.BAT' file.                                      */
/*                                                                */
/*  /P:1F0,14,S will define the port address to be installed on   */
/*  the CD-ROM drive to 1F0 hex, specifies that the IRQ line      */
/*  that you wish your hardware to be configured as IRQ 14 and 	  */
/*  the CD-ROM drive has been configured as slave drive		  */
/*                                                                */
/*  /V if present will turn on the verbose option at boot-up.     */
/*                                                                */
/*                                                                */
/******************************************************************/