D K 3 2 8 H - 4 3 HITACHI
Native| Translation
------+-----+-----+-----
Form 3.5"/HH Cylinders | | |
Capacity form/unform 4370/ MB Heads 10| | |
Seek time / track 9.0/ 1.0 ms Sector/track | | |
Controller SCSI3 SI/FA Precompensation
Cache/Buffer 512 KB Landing Zone
Data transfer rate 9.000 MB/S int Bytes/Sector 512
20.000 MB/S ext SYNC
Recording method PRML 8/9 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 50 | -40 60
Power: sleep W Humidity % 8 80 | 8 90
standby W Altitude km 2.500| 12.000
idle W Shock g 5 | 60
seek 10.0 W Rotation RPM 7198
read/write W Acoustic dBA 45
spin-up W ECC Bit
MTBF h 1000000
Warranty Month
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
HITACHI DK328H-43 JUMPER SETTING
+---------------------------------------------------------+
| |XX
| |XXI
| |XXN
| |XXT
| |XXE
| 2++++++ |XXR
| 1++++++ |XXF
| JP2 +-+ JP3 |XXA
| | | |XXC
| | | |XXE
| 2+-+1 |XX
| |XX
| |XX
| |
| |XX Power
| |XX
+---------------------------------------------------------+
+---------------------------------------------------------+
| ++++++1 |
| J6 ++++++2 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+---------------------------------------------------------+
**********************************************************************
J U M P E R S
**********************************************************************
HITACHI DK328H-43 JUMPER SETTING
Jumper Setting
==============
NOTE
The DK328H jumpers other than listed above (BLACK jumper) are
installed by the manufacturer and must not be replaced by the user!
Never remove any of the BLACK factory set jumpers.
These jumpers are unique to each drive.
All jumpers should be set with power off.
JP2
----
2--+--+--+--+--+
| | |XX|XX|XX| XX = FACTORY SET
1--+--+--+--+--+
| + Write Protect
+--- Delayed Spindle Start
JP3
---
+--+ Disable SCSI Bus Parity
+--+ Disable Spindle Auto Start
+--+ Enable Terminator
+--+ Term. Power from SCSI Bus
+--+ Term. Power from Drive
2--1
JP6
---
1---+---+---+---+---+
|LED|XXX|ID2|ID1|ID0|
2---+---+---+---+---+
+----------+-----------------------+
| SCSI ID | Jumpers |
| | ID2 | ID1 | ID0 |
+----------+-------+-------+-------+
| 0 | OPEN | OPEN | OPEN |
+----------+-------+-------+-------+
| 1 | OPEN | OPEN | CLOSED|
+----------+-------+-------+-------+
| 2 | OPEN | CLOSED| OPEN |
+----------+-------+-------+-------+
| 3 | OPEN | CLOSED| CLOSED|
+----------+-------+-------+-------+
| 4 | CLOSED| OPEN | OPEN |
+----------+-------+-------+-------+
| 5 | CLOSED| OPEN | CLOSED|
+----------+-------+-------+-------+
| 6 | CLOSED| CLOSED| OPEN |
+----------+-------+-------+-------+
| 7 | CLOSED| CLOSED| CLOSED| default
+----------+-------+-------+-------+
**********************************************************************
I N S T A L L
**********************************************************************
-ANY DIREC.
Notes on installation
=====================
Installation direction
----------------------
horizontally vertically
+-----------------+ +--+ +--+
| | | +-----+ +-----+ |
| | | | | | | |
+-+-----------------+-+ | | | | | |
+---------------------+ | | | | | |
| | | | | |
| | | | | |
+---------------------+ | +-----+ +-----+ |
+-+-----------------+-+ +--+ +--+
| |
| |
+-----------------+
The drive will operate in all axis (6 directions).